Products
Submersible Motor Pumps
Item no.: N/ASubmersible Motor Pumps run reliably and safely, are powerful, effective and eco-friendly at the same time. Submersible Motor Pumps ensure a high efficiency through standards and perfection.
- Top performance under tough conditions (application in slurry and biogas facilities)
- Spiral shaped shearing edge and large volume housing to prevent blockages
- Thermo-control is installed as standard to prevent damage from overheating
- Pumping medium temperature up to 50° C
- Smooth design prevents the accumulation of fibrous materials
- Space-saving design
- A wide range of accessories
Design
- Electrical motors 4,0 – 22,0 kW
- Three phase motors 400 V, 50 Hz, 1450 rpm
- IP68 protection category, insulating category F = 155 ° C
- Thermo-control for each phase as overheating protection
- Motor housing in 1,4301 stainless steel
- Pump housing made from cast iron material coated with 2-component plastic lacquer
- Large pump housing and therefore resistant to blockage
- Pump impeller with intake auger and chopping mechanism with tungsten carbide wear protection
- Galvanised steel suction plate with cutting edges and winding protection
- Sealed with radial shaft seal rings on special acid-resistant hardened rings
- Electric cable with water-blocking devices in the longitudinal direction of the cable for moisture protection
- Special PU outer sheathing with molded connection
- 4301 stainless steel slide bearing and absorb flange
Sizes and Specifications
| Type | Motor power | Rotational speed | Flow rate | Material |
|---|---|---|---|---|
| TT TMP 040 | 4,0 kW | 1450 rpm | 80 m3/h | Cast iron |
| TT TMP 055 | 5,5 kW | 1450 rpm | 130 m3/h | Cast iron |
| TT TMP 075 | 7,5 kW | 1450 rpm | 180 m3/h | Cast iron |
| TT TMP 110 | 11,0 kW | 1450 rpm | 310 m3/h | Cast iron |
| TT TMP 170 | 17,0 kW | 1450 rpm | 350 m3/h | Cast iron |
| TT TMP 220 | 22,0 kW | 1450 rpm | 410 m3/h | Cast iron |