Products
Slurry Pumps
Item no.: N/AWe offer a range of pump types to suit different applications, including Centrifugal Pumps with a long shaft, Submersible Motor Pumps, and Rotary Lobe Pumps.
Each pump is designed for specific operational needs. Centrifugal Pumps are ideal for reception pits and slurry pits up to 6 meters deep, Submersible Motor Pumps provide powerful and eco-friendly performance, and Rotary Lobe Pumps are optimized for pumping highly contaminated liquids with high dry matter content.
All Stallkamp pumps are built for efficiency and durability, ensuring reliable operation with minimal maintenance requirements.
Item no.: N/A Submersible Motor Pumps
Learn More
×
Submersible Motor Pumps
Submersible Motor Pumps run reliably and safely, are powerful, effective and eco-friendly at the same time. Submersible Motor Pumps ensure a high efficiency through standards and perfection.
Benefits
- Top performance under tough conditions (application in slurry and biogas facilities)
- Spiral shaped shearing edge and large volume housing to prevent blockages
- Thermo-control is installed as standard to prevent damage from overheating
- Pumping medium temperature up to 50° C
- Smooth design prevents the accumulation of fibrous materials
- Space-saving design
- A wide range of accessories
Design
- Electrical motors 4,0 – 22,0 kW
- Three phase motors 400 V, 50 Hz, 1450 rpm
- IP68 protection category, insulating category F = 155 ° C
- Thermo-control for each phase as overheating protection
- Motor housing in 1,4301 stainless steel
- Pump housing made from cast iron material coated with 2-component plastic lacquer
- Large pump housing and therefore resistant to blockage
- Pump impeller with intake auger and chopping mechanism with tungsten carbide wear protection
- Galvanised steel suction plate with cutting edges and winding protection
- Sealed with radial shaft seal rings on special acid-resistant hardened rings
- Electric cable with water-blocking devices in the longitudinal direction of the cable for moisture protection
- Special PU outer sheathing with molded connection
- 4301 stainless steel slide bearing and absorb flange
Sizes and Specifications
| Type | Motor power | Rotational speed | Flow rate | Material |
|---|---|---|---|---|
| TT TMP 040 | 4,0 kW | 1450 rpm | 80 m3/h | Cast iron |
| TT TMP 055 | 5,5 kW | 1450 rpm | 130 m3/h | Cast iron |
| TT TMP 075 | 7,5 kW | 1450 rpm | 180 m3/h | Cast iron |
| TT TMP 110 | 11,0 kW | 1450 rpm | 310 m3/h | Cast iron |
| TT TMP 170 | 17,0 kW | 1450 rpm | 350 m3/h | Cast iron |
| TT TMP 220 | 22,0 kW | 1450 rpm | 410 m3/h | Cast iron |
Item no.: N/A Rotary Lobe Pumps
Learn More
×
Rotary Lobe Pumps
Rotary Lobe Pumps with electric motor, set up on console. Suitable for pumping highly contaminated liquids with a high dry matter content.
Rotary Lobe Pumps are extremely durable, even under heavy loads. Rotary Lobe Pumps can withstand high flow rates and keep maintenance to a minimum.
Benefits
- Modular deign for quick piston change with few steps
- Extremely durable
- Almost no downtime
- Bearing on both sides for increased stability
Sizes and Specifications
| Type | Motor power | Stroke volume | Max. rotational speed | Max. flow rate | Capacity |
|---|---|---|---|---|---|
| 70 | 4,0 kW | 1,25 L/U | 384 rpm | 29 m3/h | 480 l/min |
| 70 | 5,5 kW | 1,25 L/U | 446 rpm | 33 m3/h | 558 l/min |
| 140 | 5,5 kW | 2,50 L/U | 234 rpm | 35 m3/h | 586 l/min |
| 140 | 7,5 kW | 2,50 L/U | 346 rpm | 52 m3/h | 866 l/min |
| 140 | 7,5 kW | 2,50 L/U | 446 rpm | 67 m3/h | 1117 l/min |
| 210 | 7,5 kW | 3,76 L/U | 234 rpm | 53 m3/h | 879 l/min |
| 210 | 11,0 kW | 3,76 L/U | 346 rpm | 78 m3/h | 1299 l/min |
| 210 | 15,0 kW | 3,76 L/U | 446 rpm | 100 m3/h | 1675 l/min |
| 280 | 11,0 kW | 5,01 L/U | 234 rpm | 70 m3/h | 1172 l/min |
| 280 | 15,0 kW | 5,01 L/U | 346 rpm | 104 m3/h | 1732 l/min |
| 280 | 18,5 kW | 5,01 L/U | 446 rpm | 134 m3/h | 2233 l/min |
| 350 | 15,0 kW | 6,26 L/U | 234 rpm | 88 m3/h | 1465 l/min |
| 350 | 18,5 kW | 6,26 L/U | 346 rpm | 130 m3/h | 2166 l/min |
| 350 | 22,0 kW | 6,26 L/U | 446 rpm | 167 m3/h | 2792 l/min |
| 420 | 18,5 kW | 7,51 L/U | 234 rpm | 105 m3/h | 1758 l/min |
| 420 | 22,0 kW | 7,51 L/U | 346 rpm | 156 m3/h | 2599 l/min |
| 420 | 22,0 kW | 7,51 L/U | 446 rpm | 201 m3/h | 3350 l/min |
Item no.: N/A Long-Shaft Centrifugal Pumps
Learn More
×
Long-Shaft Centrifugal Pumps
Centrifugal pumps with a long shaft.
The pumps are suitable for reception pits and slurry pits up to a depth of 6 m. Long-Shaft Centrifugal Pumps come either with sturdy motors (up to 22 kW/30 PS) or are PTO-driven – have a powerful and long-lasting centerpiece especially suitable for slurry and biogas plants with both fixed piping systems and flushing pipes.
Benefits
- Virtually unaffected by foreign bodies and blockages
- Long life cycle thanks to stretch coupling (in electric drive only)
- Fiber of silage or straw in the slurry are shredded
- High flow rates and delivery pressure
- Pumping medium temperature up to 70° C
- Flexibility thanks to perfect standard equipment and comprehensive range of
- accessories
- Electric or PTO drive
Sizes and Specifications
| Type | Motor power | Rotational speed | Flow rate | Material |
|---|---|---|---|---|
| TT LKP 055 | 5,5 kW | 1450 rpm | 155 m3/h | Cast iron |
| TT LKP 075 | 7,5 kW | 1450 rpm | 230 m3/h | Cast iron |
| TT LKP 110 | 11,0 kW | 1450 rpm | 312 m3/h | Cast iron |
| TT LKP 150 | 15,0 kW | 1450 rpm | 345 m3/h | Cast iron |
| TT LKP 185 | 18,5 kW | 1450 rpm | 365 m3/h | Cast iron |
| TT LKP 220 | 22,0 kW | 1450 rpm | 408 m3/h | Cast iron |