Products

idOil-Solar Oil Separator Alarm

Item no.: N/A

idOil-Solar Oil Separator Alarms are solar-powered alarms and communication units for monitoring levels of liquid hydrocarbon, sludge or high levels in oil and sand separators, where main power electricity is unavailable.

idOil-Solar Oil Separator Alarms can be equipped with beacon lights and/or 3G modems.

In case of alarm, idOil-Solar Oil Separator Alarm will either initiate a flashing beacon, send a text message (SMS) to pre-set phone numbers, or both. All alarms are visible locally in the idOil-Solar control unit, during the short wake-up period.

idOil-Solar Oil Separator Alarms remain deactivated most of the time, which mean that they consume minimum power. The device initiates at predetermined measurement intervals, in order to perform the sensor measurements. When equipped with a 3G modem, the device also starts listening at predetermined intervals, to receive any possible setting commands and simultaneously reports measurement values.

Category:

Comes with:

  • Battery
  • Solar panel housing
  • Charge controller
  • idOil-30 Battery control device
  • Selected idOil sensors
  • Suitable cable connectors
  • LMS-SAS5 Mounting kit for sensor

Benefits:

  • Up to three idOil-sensors can be connected at the time
  • Polarity-free connections
  • Easy installation
  • Display with system status and alarm information

Types
W x H x D
Weight
Operation temperature
SP SolarSET signal light with high water level sensor 200 x 400 x 132 mm 8,0 kg -30° C…+60° C
SP SolarSET light with oil layer sensor 200 x 400 x 132 mm 8,0 kg -30° C…+60° C
SP SolarSET light with sludge layer sensor 200 x 400 x 132 mm 8,0 kg -30° C…+60° C
SP SolarSET light with high water level/oil layer sensor 200 x 400 x 132 mm 8,0 kg -30° C…+60° C
SP SolarSET light with oil layer/sludge layer sensor 200 x 400 x 132 mm 8,0 kg -30° C…+60° C